Plastic Melt Flow Index Tester-Zttest

Home Testing Machine Melt Flow Rate Tester

ZT2452

Plastic Melt Flow Index Tester

The Plastic Melt Flow Index Tester is a specialized device for determining the melt flow rate of thermoplastic plastics under specified conditions, and it can indirectly measure the molecular weight of polymers. The melt flow rate (MFR/MI) or melt volume flow rate (MVR) of thermoplastic plastics refers to the mass or volume of melt passing through a standardized die per 10 minutes under a specific temperature and load. This parameter distinguishes the viscous flow characteristics of thermoplastics in the molten state.

The tester is suitable for engineering plastics with high melting temperatures, such as polycarbonate (PC), polysulfone, fluoroplastics, and nylon, as well as plastics with lower melting temperatures, including polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), and polycarbonate (PC) resin. It plays a critical role in ensuring the quality of raw materials and products for thermoplastics and chemical fibers.

Consultation Hotline:18897911635

Product Consultation Download

Technical Indicators

Temperature Range

100℃～450℃
Temperature Stability

±0.5℃
4h Drift

≤0.5℃
Temperature Uniformity

≤0.5℃
Resolution

0.1℃
Error Correction

Random
Temperature Recovery Time After Loading

≤4min
Timing Range

0~6000s
Timing Resolution

0.1s
Cutting Methods

Automatic timed cutting, manual cutting, point-to-point cutting
Die Inner Diameter

Φ2.095±0.005mm
Die Height

8.000±0.025mm
Barrel Inner Diameter

Φ9.550±0.020mm
Load Accuracy

≤±0.5%
Standard Loads

875g、960g、1200g、1640g
Weight Accuracy

±0.5%
Output Method

Micro automatic printoutBuilt-in automatic micro-printer
Measurement Range

0.04～400g/10min
Power Supply

AC220V±10%, 50Hz

Product Advantages

01

High Precision Temperature Control

±0.5℃ accuracy ensures reliable test results.
02

Nitriding Treatment for Key Components

Enhances strength, hardness, and minimizes deformation.
03

Wide Applicability

Supports testing and data processing according to GB, ISO, ASTM, and other international standards.
04

Stable Performance with Low Failure Rate

Electrical components undergo rigorous aging tests; software is optimized for long-term stability.
05

Dual Testing Modes

Supports both mass method (MFR) and volume method (MVR) in one machine.
06

User-Friendly Touchscreen Interface

Simplifies operation and data visualization.

Relevant Standards

GB/T 3682-2018

《Determination of Melt Mass-Flow Rate (MFR) and Melt Volume-Flow Rate (MVR) of Thermoplastics》
ISO 1133:1997

《Determination of the Melt Mass-Flow Rate (MFR) and Melt Volume-Flow Rate (MVR) of Thermoplastics》
ASTM D1238

《Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer》