‌Single Column Electronic Universal Testing Machine-zttest

Home Testing Machine Electronic Universal Testing Machine

CMT2000

‌Single Column Electronic Universal Testing Machine

The CMT2000 Electronic Universal Testing Machine is designed for conducting tensile, compression, bending, shear, peeling, and tearing tests on specimens of various non-metallic materials (e.g., plastics, rubber, leather) and small metallic materials. It utilizes Japanese-made motors, servo control systems, and high-precision American sensors, integrated with a globally renowned fully closed-loop measurement and control system. This system enables automatic switching between multiple control modes, including force control, deformation control, and displacement control. Featuring the most powerful software in China’s testing machine industry, the system automatically generates real-time graphs and tables while calculating key parameters such as elongation, tensile strength, compressive strength, yield strength, and elastic modulus. The software also offers an English interface, reflecting both China’s highest domestic engineering standards and world-class technological excellence. The machine complies with global testing standards including GB, ISO, ASTM, DIN, JIS, and CE.

Consultation Hotline:18926546499

Product Consultation Download

Technical Indicators

Maximum test force

500N
Tester Accuracy Class

0.5 level
Measuring range of test force

0.2%—100%FS
Relative error of test force

Within ±0.5% of display value
Resolving power of test force

1/±350,000 of the maximum test force (constant resolution throughout)
Large deformation measurement range (optional accessory)

10-800mm
Relative error of large deformation

Within ±0.5% of display value
Large deformation resolution

0.008mm
Relative error of displacement

Within ±0.5% of display value
Displacement resolution

0.03µm
Adjustment range of force control rate

0.01-5%FS/S
Relative error of force control rate

Within ±1% of set value
Relative error of deformation control rate

Rate < 0.05%FS, within ±2% of set value; rate ≥ 0.05%FS, within ±0.5% of set value
Beam speed adjustment range

0.001—500mm/min
Relative error of beam speed

Rate < 0.01mm/min, within ±1.0% of the set value; rate ≥ 0.01mm/min, within ±0.2% of the set value
Constant force, constant deformation, constant displacement control range

0.5%--100%FS

Product Advantages

01

High precision

Displacement resolution of 0.05µm
02

DSP-1000 Full Digital Closed Loop Control and Measurement System

DCS-300 adopts advanced neuron adaptive PID control algorithm, which can realize on-line identification of system parameters, on-line optimization of control quantity, on-line switching of control ring, and full digital three closed-loop (displacement, force, deformation) control, which makes the performance of the whole machine significantly better than domestic products and comparable with the technical level of foreign products. This makes the performance of the whole machine significantly better than domestic products and comparable to the technical level of foreign products.
03

High accuracy of load control

It can realize the function of load preservation, and the accuracy of load preservation is within ±0.1% of the set value when the set value is ≥10%FS; and within ±1% of the set value when the set value is <10%FS.
04

Wide range of adaptations

Tests and data processing can be performed according to various standards such as GB, ISO, JIS, ASTM, DIN and so on.
05

Good stability in the use of equipment, low customer complaint rate

The higher the technical content of the equipment on the stability of the equipment electrical and software requirements are higher, otherwise maintenance is a big problem. My company's electrical part is after strict aging test, exclude the bad factors in the early stage. Test software is the standard configuration, after a long examination, low failure rate.
06

Beam Displacement Measurement

Adopt high precision photoelectric encoder imported from Japan to realize beam displacement through controller.
07

Powerful software

It can satisfy the test of different materials, and can execute different standards at the same time, including foreign standards (with data processing function of multiple standards), and the units: N, kN, g, kgf, Ib, cN can be converted to each other. The test software designed completely according to the test standard is powerful. The test curve can be enlarged, which can clearly see how much and how fast the data are collected, and the smoothness of the curve, which also reflects the overall processing capability of the hardware and software.

Relevant Standards

GB/T 1040

《Plastics Determination of tensile properties》
GB/T 1041

《Measurement of Compression Properties of Plastics》
GB/T 9341

《Plastics: Determination of bending properties》
GB/T 529

Determination of tear strength of vulcanized or thermoplastic rubber (trouser, right angle and crescent shaped specimens)
GB/T 528

Determination of tensile stress-strain properties of vulcanized or thermoplastic rubber