Universal Tensile Testing Machine-ZTTEST

Home Testing Machine Electronic Universal Testing Machine

CMT4000

Universal Tensile Testing Machine

The CMT4000 Universal Testing Machine is designed for conducting tensile, compression, bending, shear, peeling, and tearing tests on specimens of various non-metallic materials (e.g., plastics, rubber, leather) and small metallic materials. Equipped with Japanese-made motors, servo control systems, and high-precision American sensors, it integrates a globally renowned fully closed-loop measurement and control system, enabling automatic switching between force control, deformation control, displacement control, and other modes. Featuring the most advanced software in China’s testing machine industry, the system automatically generates real-time graphs and tables while calculating key parameters such as elongation, tensile strength, compressive strength, yield strength, and elastic modulus. The software also supports an English interface, reflecting both China’s highest domestic standards and world-class technological excellence. The machine complies with global testing standards including GB, ISO, ASTM, DIN, JIS, and CE.

Consultation Hotline:18926546499

Product Consultation Download

Technical Indicators

Maximum loading

1000N
Force Range

0.4%～100%
Accuracy Class

Level 0.5
Load Resolution

Maximum load ±600,000 yards, no gearing inside or outside, and constant resolution the whole time
Force Measurement Accuracy

Within ±0.5% of display value
Displacement precision

Within ±0.5% of display value
Speed Range

0.001～500mm/min stepless setting
Speed Accuracy

Wthin ±0.5% of display value
Effective stretch distance

1100 mm
Effective test width

400 mm
Large Deformation Measuring Range

10～800mm (if equipped with large deformation measuring device; marking distance:10 mm / mm / mm ( mm))
Large Deformation Error

Within ±0.5% of the indicated value; (if equipped with large deformation measuring device)
Large Deformation Measurement Resolution

0.005mm; (if equipped with large deformation measuring device)
Software & User Interface

A set of Windows Chinese test software
protective function

Overload protection, limit protection, over-current over-voltage over-temperature protection
Overall dimensions

695×580×1915mm

Product Advantages

01

High precision

Displacement resolution of 0.05µm
02

DSP-1000 Full Digital Closed Loop Control and Measurement System

DCS-300 adopts advanced neuron adaptive PID control algorithm, which can realize on-line identification of system parameters, on-line optimization of control quantity, on-line switching of control ring, and full digital three closed-loop (displacement, force, deformation) control, which makes the performance of the whole machine significantly better than domestic products and comparable with the technical level of foreign products. This makes the performance of the whole machine significantly better than domestic products and comparable to the technical level of foreign products.
03

16-channel high precision data acquisition system and 3-channel optical encoder position capture module

The data acquisition system consists of 16 highly accurate 32-bit A/D conversion channels. The resolution is up to 1/300,000, with no gearing throughout. the A/D conversion speed and gain can be programmed on-line. 3-channel photoelectric encoder position capture system allows orthogonal code pulse frequency up to 5MHz with error correction, direction recognition, counting and so on.
04

DSP-based control system platform

DSP is a RISC dedicated CPU with an instruction system optimized for automation applications (e.g., FFT operations) and integrates many peripheral functions, making it suitable for real-time industrial control and measurement systems.
05

High accuracy of load control

It can realize the function of load preservation, and the accuracy of load preservation is within ±0.1% of the set value when the set value is ≥10%FS; and within ±1% of the set value when the set value is <10%FS.
06

Wide range of adaptations

Tests and data processing can be performed according to various standards such as GB, ISO, JIS, ASTM, DIN and so on.
07

Test reports and curves

Curve traversal, the test report can be edited, the test curve fineness is high, indicating that the test sampling frequency is fast, compared with peers is more obvious.
08

Good stability in the use of equipment, low customer complaint rate

The higher the technical content of the equipment on the stability of the equipment electrical and software requirements are higher, otherwise maintenance is a big problem. My company's electrical part is after strict aging test, exclude the bad factors in the early stage. Test software is the standard configuration, after a long examination, low failure rate.
09

Beam Displacement Measurement

Adopt high precision photoelectric encoder imported from Japan to realize beam displacement through controller.
10

Transmission Control System

Adopting Japan full digital AC servo and high precision, high response frequency AC motor, through the controller to realize full digital closed-loop control. The motor is connected to the Taiwan reducer, and the screw is driven by the synchronous toothed belt imported from Japan, which ensures the high efficiency of the transmission system, low noise, smooth transmission, and guarantees the speed accuracy within ±0.2% of the display value.
11

Powerful software

It can satisfy the test of different materials, and can execute different standards at the same time, including foreign standards (with data processing function of multiple standards), and the units: N, kN, g, kgf, Ib, cN can be converted to each other. The test software designed completely according to the test standard is powerful. The test curve can be enlarged, which can clearly see how much and how fast the data are collected, and the smoothness of the curve, which also reflects the overall processing capability of the hardware and software.

Relevant Standards

GB/T 1040

《Plastics Determination of tensile properties》
GB/T 1041

《Measurement of Compression Properties of Plastics》
GB/T 9341

《Measurement of bending properties of plastics》
GB/T 529

Determination of tear strength of vulcanized or thermoplastic rubber (trouser, right angle and crescent shaped specimens)
GB/T 528

Determination of tensile stress-strain properties of vulcanized or thermoplastic rubber
GB/T 16491-2008

Electronic Universal Testing Machine
GB/T 14452-93
GB/T 7314-2005
GB/T 16491

《Electronic Universal Testing Machine》
GB/T 2611

《General Technical Requirements for Testing Machines》
JJG 139

《Tensile, Pressure and Universal Testing Machines》
JJG 475

《Electronic Universal Testing Machine》