Universal Material Testing Machine-zttest

Home Testing Machine Electronic Universal Testing Machine

CMT6000

Universal Material Testing Machine

The CMT6000 Universal Material Testing Machine is designed for tensile, compression, bending, shear, peeling, and tearing tests on specimens of non-metallic materials (e.g., plastics, rubber, leather) and small metallic materials. It incorporates imported high-precision motors, servo control systems, and sensors, along with a fully closed-loop measurement and control system, enabling automatic switching between force control, deformation control, displacement control, and other modes. Equipped with the most advanced software in China’s testing machine industry, the system automatically generates real-time graphs and tables while calculating parameters such as elongation, tensile strength, compressive strength, yield strength, and elastic modulus. The software also supports an English interface, reflecting both China’s highest domestic standards and world-class technological excellence. The machine complies with international testing standards including GB, ISO, ASTM, DIN, JIS, and CE.

Consultation Hotline:18926546499

Product Consultation Download

Technical Indicators

Maximum load

5KN
Force range

0.4%～100%
Accuracy Class

0.5 level
Load Resolution

Maximum load ±350,000 yards, not graded inside or outside, and constant resolution throughout
Force Measurement Accuracy

Within ±1% of display value
displacement accuracy

Within ±0.5% of display value
speed range

0.001～500mm/min stepless setting
Speed Accuracy

Within ±1% of display value
Effective stretching distance

700 mm
Effective test width

340 mm
Large Deformation Measurement Range

10～800mm (if equipped with large deformation measuring device; marking distance:10 mm mm mm mm ( mm))
Large Deformation Error

Within ±0.5% of the indicated value; (if equipped with large deformation measuring device)
Large Deformation Measurement Resolution

0.008mm; (if equipped with large deformation measuring device)
Software and User Interface

Windows Chinese version PowerTest test software set
protective function

Overload protection, limit protection, over-current over-voltage over-temperature protection
Overall dimensions

600×460×1520mm

Product Advantages

01

High precision

Displacement resolution of 0.05µm
02

DSP-1000 Full Digital Closed Loop Control and Measurement System

DCS-300 adopts advanced neuron adaptive PID control algorithm, which can realize on-line identification of system parameters, on-line optimization of control quantity, on-line switching of control ring, and full digital three closed-loop (displacement, force, deformation) control, which makes the performance of the whole machine significantly better than domestic products and comparable with the technical level of foreign products. This makes the performance of the whole machine significantly better than domestic products and comparable to the technical level of foreign products.
03

High accuracy of load control

It can realize the function of load preservation, and the accuracy of load preservation is within ±0.1% of the set value when the set value is ≥10%FS; and within ±1% of the set value when the set value is <10%FS.
04

Wide range of adaptations

Tests and data processing can be performed according to various standards such as GB, ISO, JIS, ASTM, DIN and so on.
05

Test reports and curves

Curve traversal, the test report can be edited, the test curve fineness is high, indicating that the test sampling frequency is fast, compared with peers is more obvious.
06

Good stability in the use of equipment, low customer complaint rate

The higher the technical content of the equipment on the stability of the equipment electrical and software requirements are higher, otherwise maintenance is a big problem. My company's electrical part is after strict aging test, exclude the bad factors in the early stage. Test software is the standard configuration, after a long examination, low failure rate.
07

Beam Displacement Measurement

Adopt high precision photoelectric encoder imported from Japan to realize beam displacement through controller.
08

Transmission Control System

Adopt full digital AC servo and high precision, high response frequency AC motor, realize full digital closed-loop control through controller. Ensure high efficiency of transmission system, low noise, smooth transmission, and ensure the speed accuracy within ± 0.2% of the display value.
09

Powerful software

It can satisfy the test of different materials, and can execute different standards at the same time, including foreign standards (with data processing function of multiple standards), and the units: N, kN, g, kgf, Ib, cN can be converted to each other. The test software designed completely according to the test standard is powerful. The test curve can be enlarged, which can clearly see how much and how fast the data is collected, and the smoothness of the curve, which also reflects the overall processing capability of the hardware and software.

Relevant Standards

GB/T 1040

《Plastics Determination of tensile properties》
GB/T1041

《Measurement of Compression Properties of Plastics》
GB/T 9341

《Plastics: Determination of bending properties》
GB/T 529

Determination of tear strength of vulcanized or thermoplastic rubber (trouser, right angle and crescent shaped specimens)
GB/T 528

Determination of tensile stress-strain properties of vulcanized or thermoplastic rubber
ISO 34-1

Rubber,vulcanized or thermoplastic-Determination of tear strength-part1：Trouser,angle and crescent test pieces
ISO 37

Rubber,vulcanized or thermoplastic-Determination of tensile stress-strain properties
GB/T 16491

《Electronic Universal Testing Machine》
GB/T 2611

《General Technical Requirements for Testing Machines》
JJG 139

《Tensile, Pressure and Universal Testing Machines》
JJG 475

《Electronic Universal Testing Machine》