The CMT6000 Universal Material Testing Machine is designed for tensile, compression, bending, shear, peeling, and tearing tests on specimens of non-metallic materials (e.g., plastics, rubber, leather) and small metallic materials. It incorporates imported high-precision motors, servo control systems, and sensors, along with a fully closed-loop measurement and control system, enabling automatic switching between force control, deformation control, displacement control, and other modes. Equipped with the most advanced software in China’s testing machine industry, the system automatically generates real-time graphs and tables while calculating parameters such as elongation, tensile strength, compressive strength, yield strength, and elastic modulus. The software also supports an English interface, reflecting both China’s highest domestic standards and world-class technological excellence. The machine complies with international testing standards including GB, ISO, ASTM, DIN, JIS, and CE.

The Plastic Melt Flow Index Tester is a specialized device for determining the melt flow rate of thermoplastic plastics under specified conditions, and it can indirectly measure the molecular weight of polymers. The melt flow rate (MFR/MI) or melt volume flow rate (MVR) of thermoplastic plastics refers to the mass or volume of melt passing through a standardized die per 10 minutes under a specific temperature and load. This parameter distinguishes the viscous flow characteristics of thermoplastics in the molten state.

The tester is suitable for engineering plastics with high melting temperatures, such as polycarbonate (PC), polysulfone, fluoroplastics, and nylon, as well as plastics with lower melting temperatures, including polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), and polycarbonate (PC) resin. It plays a critical role in ensuring the quality of raw materials and products for thermoplastics and chemical fibers.

The CMT4000 Universal Testing Machine is designed for conducting tensile, compression, bending, shear, peeling, and tearing tests on specimens of various non-metallic materials (e.g., plastics, rubber, leather) and small metallic materials. Equipped with Japanese-made motors, servo control systems, and high-precision American sensors, it integrates a globally renowned fully closed-loop measurement and control system, enabling automatic switching between force control, deformation control, displacement control, and other modes. Featuring the most advanced software in China’s testing machine industry, the system automatically generates real-time graphs and tables while calculating key parameters such as elongation, tensile strength, compressive strength, yield strength, and elastic modulus. The software also supports an English interface, reflecting both China’s highest domestic standards and world-class technological excellence. The machine complies with global testing standards including GB, ISO, ASTM, DIN, JIS, and CE.

The CMT2000 Electronic Universal Testing Machine is designed for conducting tensile, compression, bending, shear, peeling, and tearing tests on specimens of various non-metallic materials (e.g., plastics, rubber, leather) and small metallic materials. It utilizes Japanese-made motors, servo control systems, and high-precision American sensors, integrated with a globally renowned fully closed-loop measurement and control system. This system enables automatic switching between multiple control modes, including force control, deformation control, and displacement control. Featuring the most powerful software in China’s testing machine industry, the system automatically generates real-time graphs and tables while calculating key parameters such as elongation, tensile strength, compressive strength, yield strength, and elastic modulus. The software also offers an English interface, reflecting both China’s highest domestic engineering standards and world-class technological excellence. The machine complies with global testing standards including GB, ISO, ASTM, DIN, JIS, and CE.

The CMT5000 Universal Metal Tensile Testing Machine is primarily designed for the mechanical property testing and analysis of metallic and non-metallic materials through tensile, compression, and bending tests. Equipped with three closed-loop control modes (stress, strain, and displacement), it accurately measures parameters such as maximum force, tensile strength, bending strength, compressive strength, elastic modulus, elongation at break, and yield strength. Testing procedures and data reporting strictly comply with international standards including GB, ISO, JIS, ASTM, and DIN.

The Charpy Impact Tester is a detection instrument used to evaluate the impact resistance performance of non-metallic materials (e.g., plastics, nylon, hard rubber, fiberglass-reinforced plastic (FRP), electrical insulating materials) under dynamic loads. This machine features semi-automatic control for user-friendly operation and high efficiency. Test data is automatically recorded after each impact. Its advantages are particularly evident in laboratories requiring continuous impact tests or manufacturers conducting large-scale testing. The dedicated control panel and display screen meet user requirements for operations and data visualization, such as displaying impact absorption energy, impact strength, pendulum swing angle, and printing test reports. This machine supports both Charpy (simple beam) and Izod (cantilever beam) tests, with easily adjustable and replaceable supports, making it an essential tool for rigid plastic manufacturers, quality inspection agencies, and research institutes.

The Izod Impact Tester is a detection instrument used to evaluate the impact resistance performance of non-metallic materials (e.g., plastics, nylon, hard rubber, fiberglass-reinforced plastic (FRP), electrical insulating materials) under dynamic loads. This machine features semi-automatic control for user-friendly operation and high efficiency. Test data is automatically recorded after each impact. Its advantages are particularly evident in laboratories requiring continuous impact tests or manufacturers conducting large-scale testing. The dedicated control panel and display screen meet user requirements for operations and data visualization, such as displaying impact absorption energy, impact strength, pendulum swing angle, and printing test reports. This machine supports both Izod (cantilever beam) and Charpy (simple beam) tests, with easily adjustable and replaceable supports, making it an essential tool for rigid plastic manufacturers, quality inspection agencies, and research institutes.

ZWK-6X Microcomputer Control Thermal Deformation Vicat Softening Point Tester is used to test the Vicat Softening Temperature and Load Deflection Temperature of thermoplastic pipes and fittings. The machine's main sensors and execution components have the advantages of good quality, high reliability and high safety, the specimen frame can be automatically lifted and lowered, and it is equipped with PowerTest test software, which is specialized in testing the Vicat softening temperature and load deflection temperature. This machine is an indispensable testing instrument for some plastic pipes and fittings manufacturers and quality inspection units.